The thermally broken Janisol 2 EI30 profile system enables the efficient and reliable fabrication of single and double-leaf doors, fire-resistant glazing and doors in glass walls. The basic depth for door frames and door leaves is just 60 mm. Profiles with face widths of 25, 50 and 85 mm can be used for mullions and transoms. A continuous shadow joint inside and outside lends the construction a certain lightness and elegance with extremely narrow profile face widths. Fire-resistant glazing from a variety of providers can be used for infill units. A comprehensive range of fully tested fittings, locks, accessories and integrated door closers is also available. The appearance is coordinated to match that of all the other Jansen door systems. Janisol 2 EI30 has many approval certificates. These are constantly being extended and improved in consultation with users and the building authorities. The many successfully tested system variations allow particularly costefficient, attractive and complex project solutions in line with objectives. Janisol 2 EI30 doors have also been tested as burglar-resistant doors in accordance with EN 1627, classified in resistance class RC3 and are approved as smoke doors in accordance with DIN 18095 and EN 1634-3.
Product types and details that provide excellent fire and smoke insulation indoors and outdoors, and enable wide openings to be closed;
Janisol 2 fire resistant doors, which will be found in outdoor areas specified in the EN 16034 and EN 14351 harmonized standard, can be offered as CE marked with the values specified in the table.
Standard ID |
Characteristic |
Classification/Value |
EN 1634-1 |
Fire Resistance |
EI130 |
EN 1634-3 |
Smoke Control |
Sa |
EN 12210 |
Resistance to Wind Load |
Class 4 |
EN 12208 |
Waterthigtness |
4A |
EN ISO 10140 |
Sound Insulation |
Rw 43 dB (-1; -5) |
EN ISO 10077-2 |
Thermal Production |
1,5 W/m2K |
EN 12207 |
Air Permeability |
Class 4 |
EN 1192 |
Classification of Strenght Requirement |
Class 4 |
EN 1191 |
Mechanical Durability |
Class 8 |
EN 12217 |
Mechanical Durability |
Class 2 |
EN 13115 |
Operating Forces |
Class 2 |
EN 13049 |
Impact Resistance |
Class 1 |
EN 1627 |
Burglar Resistance |
Class 3 |
The values specified in the table represent the highest values that the system can take. The characteristic values may be variable according to the requested product type. Consult our specialist for detailed information.
In addition to the product-specific equipment developed by Jansen, Janisol C4 doors can also be equipped with pleasant non-system equipment.
Please consult for detailed information about the equipment to be used in accordance with the requested product type and opening scenario.
Application details:
Coating options up to C4 corrosion protection class in accordance with EN ISO 12944 standard for steel and galvanized steel surfaces;
*Specially developed surface color applications can be made in line with the customer's request. Consult our specialist for detailed information.
The main advantages of steel over aluminum are; “larger size”, “thinner section”, “longer life” and “fire resistant product” options.